• Kui näed ekraanil veateadet, kopeeri see siia.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Kirjelda, mida sa soovisid teha, mida sa tegid ja mis juhtus

• mis on sinu veebilehitseja?

• Palun kopeeri/kleebi kuvatud tekst inglise keeles, mitte sinu oma keeles. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Kas see tekst on kättesaadav tõlkesüsteemis ? Kui jah, kas see on tõlgitud rohkem kui 24 tundi tagasi?

• mis on sinu veebilehitseja?

• Palun selgita oma ettepanekut täpselt ja lühidalt, et oleks võimalikult lihtne mõista, mida silmas pead.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• mis on sinu veebilehitseja?

• Mis oli ekraanil, kui sind blokeeriti? (Tühi ekraan? Osa mänguliidesest? Veateade?)

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• mis on sinu veebilehitseja?

• Millist osa BGA kohandamisest ei järgitud

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Kas reeglite rikkumist on mängu taasesitusel näha? Kui jah, siis mitmendal käigul?

• mis on sinu veebilehitseja?

• Milline oli mängu tegevus, mida tahtsid sooritada?

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Mida püüdsid teha, et seda mängu tegevust käivitada?

• Mis juhtus, kui seda proovisite (veateade, mängu olekuriba teade, ...)?

• mis on sinu veebilehitseja?

• Millises mängu etapis esines probleem (Mis oli selle mänguetapi instruktsioon)?

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Mis juhtus, kui proovisite sooritada seda mängu käiku (veateade, mängu olekuriba sõnum, ...)?

• mis on sinu veebilehitseja?

• Kirjelda kuvamise probleemi. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• mis on sinu veebilehitseja?

• Palun kopeeri/kleebi kuvatud tekst inglise keeles, mitte sinu oma keeles. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Kas see tekst on kättesaadav tõlkesüsteemis ? Kui jah, kas see on tõlgitud rohkem kui 24 tundi tagasi?

• mis on sinu veebilehitseja?

• Palun selgita oma ettepanekut täpselt ja lühidalt, et oleks võimalikult lihtne mõista, mida silmas pead.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• mis on sinu veebilehitseja?