• Kui näed ekraanil veateadet, kopeeri see siia.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Kirjelda, mida sa soovisid teha, mida sa tegid ja mis juhtus

• mis on sinu veebilehitseja?

• Palun kopeeri/kleebi kuvatud tekst inglise keeles, mitte sinu oma keeles. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Kas see tekst on kättesaadav tõlkesüsteemis ? Kui jah, kas see on tõlgitud rohkem kui 24 tundi tagasi?

• mis on sinu veebilehitseja?

• Palun selgita oma ettepanekut täpselt ja lühidalt, et oleks võimalikult lihtne mõista, mida silmas pead.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• mis on sinu veebilehitseja?

• Mis oli ekraanil, kui sind blokeeriti? (Tühi ekraan? Osa mänguliidesest? Veateade?)

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• mis on sinu veebilehitseja?

• Millist osa BGA kohandamisest ei järgitud

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Kas reeglite rikkumist on mängu taasesitusel näha? Kui jah, siis mitmendal käigul?

• mis on sinu veebilehitseja?

• Milline oli mängu tegevus, mida tahtsid sooritada?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mida püüdsid teha, et seda mängu tegevust käivitada?

• Mis juhtus, kui seda proovisite (veateade, mängu olekuriba teade, ...)?

• mis on sinu veebilehitseja?

• Millises mängu etapis esines probleem (Mis oli selle mänguetapi instruktsioon)?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Mis juhtus, kui proovisite sooritada seda mängu käiku (veateade, mängu olekuriba sõnum, ...)?

• mis on sinu veebilehitseja?

• Kirjelda kuvamise probleemi. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• mis on sinu veebilehitseja?

• Palun kopeeri/kleebi kuvatud tekst inglise keeles, mitte sinu oma keeles. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Kas see tekst on kättesaadav tõlkesüsteemis ? Kui jah, kas see on tõlgitud rohkem kui 24 tundi tagasi?

• mis on sinu veebilehitseja?

• Palun selgita oma ettepanekut täpselt ja lühidalt, et oleks võimalikult lihtne mõista, mida silmas pead.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• mis on sinu veebilehitseja?