• Kui näed ekraanil veateadet, kopeeri see siia.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Kirjelda, mida sa soovisid teha, mida sa tegid ja mis juhtus

• mis on sinu veebilehitseja?

• Palun kopeeri/kleebi kuvatud tekst inglise keeles, mitte sinu oma keeles. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Kas see tekst on kättesaadav tõlkesüsteemis ? Kui jah, kas see on tõlgitud rohkem kui 24 tundi tagasi?

• mis on sinu veebilehitseja?

• Palun selgita oma ettepanekut täpselt ja lühidalt, et oleks võimalikult lihtne mõista, mida silmas pead.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• mis on sinu veebilehitseja?

• Mis oli ekraanil, kui sind blokeeriti? (Tühi ekraan? Osa mänguliidesest? Veateade?)

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• mis on sinu veebilehitseja?

• Millist osa BGA kohandamisest ei järgitud

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Kas reeglite rikkumist on mängu taasesitusel näha? Kui jah, siis mitmendal käigul?

• mis on sinu veebilehitseja?

• Milline oli mängu tegevus, mida tahtsid sooritada?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mida püüdsid teha, et seda mängu tegevust käivitada?

• Mis juhtus, kui seda proovisite (veateade, mängu olekuriba teade, ...)?

• mis on sinu veebilehitseja?

• Millises mängu etapis esines probleem (Mis oli selle mänguetapi instruktsioon)?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Mis juhtus, kui proovisite sooritada seda mängu käiku (veateade, mängu olekuriba sõnum, ...)?

• mis on sinu veebilehitseja?

• Kirjelda kuvamise probleemi. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• mis on sinu veebilehitseja?

• Palun kopeeri/kleebi kuvatud tekst inglise keeles, mitte sinu oma keeles. Kui sul on sellest veast ekraanipilt (hea tava), saad kasutada Imgur.com selle üleslaadimiseks ja lingi siia kopeerida.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Kas see tekst on kättesaadav tõlkesüsteemis ? Kui jah, kas see on tõlgitud rohkem kui 24 tundi tagasi?

• mis on sinu veebilehitseja?

• Palun selgita oma ettepanekut täpselt ja lühidalt, et oleks võimalikult lihtne mõista, mida silmas pead.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• mis on sinu veebilehitseja?